|
INFERNO CUSTOM CHASSIS
224” wheelbase, 37’ 7” length, 11’ 6” height
2009 NFPA 1901 compliant
XMFD cab with 8” raised roof
Cab notched for frame rail height crosslays
3/16” thick aluminum cab, tested to 66,000 lbs
Seating for up to six
EMS cabinet in cab, centered on rear wall
Dual air conditioning systems
HEAVY DUTY REAR MOUNT AERIAL LADDER
77’ vertical reach at only 72 degree elevation
70’ horizontal reach at 0 degrees
1250 GPM waterway
Elkhart, TFT or Akron electric monitor
Dual position waterway with electric actuator
500 pound tip load flowing 1250 GPM
Tracking spot lights
Blue LED night time climbing lights
Retraction safety interlock
Body/cab collision interlock
Bed zone interlock
Rotation interlock
LIGHTING AND ELECTRICAL
LED warning lights
LED compartment lights
Scene lights
LED underbody lights
Harrison 6kW hydraulic generator
Two 500W brow lights
Two 500W tele lights
|
|
HEAVY DUTY EXTRUDED ALUMINUM BODY
Extruded aluminum sub-frame
Extruded compartment framework & hose bed
3/16” thick, marine grade aluminum compartments
Over 225 cubic feet of storage
Left side full depth compartments
Right side full height compartment ahead & over rear wheels
Stokes storage over crosslays
Backboard storage over pump compt
ISO ground ladders
6 pike poles
Right side EZ Stack hose bed
PUMP AND PLUMBING
EZ Pump Access makes service quick with a tilted cab
Hale or Waterous midship pump, ratable up to 2250 GPM
Optional 500 GPM PTO pump for pump and roll
330 GPM at 80 PSI , travelling 2.5 MPH
4” full flow waterway discharge w/and wheel actuator & positional indicator
Right side LDH discharge with Storz elbow
Triple crosslays, two 1¾” and one 2½”, frame rail height
Two left side panel 2-1/2” discharges
One right side panel 2-1/2” discharge
Right side hinged pump panel
500 gallon water tank, optional foam cell
|
